Before you start
- Connect the device to a serial port on the Collector host. That means the Collector runs on a machine next to the device.
- Note the port name:
/dev/ttyUSB0or similar on Linux,COM3or similar on Windows.
Add the device
- In the portal, go to Devices and select New device.
- Choose the Collector that can reach the device, and set Protocol to Generic Serial (RS-232).
- Enter the settings below and save. The Collector picks up the new device within seconds.
Readings
Reachability and response time are recorded on every poll. The device’s own values depend on what its endpoint returns.Commands
This adapter monitors only; it has no commands.Updated 23 Oct 2026 15:20 · page 376c428