- Power schedule switches your rooms off each evening and back on each morning, saving energy and giving the equipment a daily restart.
- Readiness checks run a test routine in each room at a set time, to prove it actually works: the displays are on, the codec is online, the microphones hear audio. Problems are found before the first meeting rather than during it.
Power schedule
How a night runs
For each room, on each scheduled day:- Power off at the power-off time: every device in the room that supports it, such as displays, is switched off.
- Power on at the power-on time.
- Warm up: a short pause while devices boot and report in.
- Ready or Failed: the room is ready once every device has switched back on.
Set the schedule
Select Save changes when you’re done.
Customise a room
The rooms table lists every room by building, with the times it’s switched off and on. Select Customise on a room (Edit once it’s customised) and tick Customise next to Power off at, Power on at or Days of week to give it its own; leave a field unticked to follow the default. You can also exclude a room up to and including a date. Choose Exclude until and a Reason, such as planned maintenance or a device awaiting replacement; the reason is required, and the Note (optional) is free text. An excluded room is neither switched off nor checked, and has no runs for those days. Customised rooms show Customised, and their button reads Edit. Select Reset to return a room to the defaults.Power schedule by room tag
If you use room tags, a tag can carry its own Power off at and Power on at times and Days, so every room with the tag shares them. For example, give Courtroom a 21:00 power-off for evening sittings. The By room tag card on the Power schedule tab lists every tag. Select Set times on a tag and tick Customise on what it should set; anything unticked comes from the default. Remove takes the tag’s settings away. Each part of a room’s schedule comes from the room’s own settings first, then its tag’s, then the default. A room with several tags uses the highest tag in the list that has settings; the arrows set the order, which is the same list as for readiness checks by tag. In the rooms list, a room using a tag’s settings shows From tag, and its Customise dialog shows what it inherits from the tag.One-off dates
For a day that differs from the weekly schedule, add a date under One-off dates on the Power schedule tab. Select Add a date, pick the day and the rooms it applies to (one room, the Rooms tagged a tag, or Every room), and choose:
A room’s own date wins, then a date for one of its tags (the highest in the tag order, if several have one that day), then a date for every room. So you can close the whole estate, keep the courtrooms open, and still close one court. Dates are in the organisation’s timezone, and an excluded room stays excluded whatever its dates say. Select the bin on a date to remove it; the weekly schedule applies again. You need Manage Room Readiness to add or remove dates.
Defer tonight
If a room is in use this evening, select Defer tonight. The room skips tonight’s power-down and returns to its schedule tomorrow; its readiness check the next morning is unaffected. You need Defer tonight’s power-down, which operators have by default. To do it for many rooms, filter the rooms list by room tag. A bar appears with Defer tonight, Exclude… and Clear exclusions, which apply to every room with that tag. The rooms list on Readiness checks has the same tag filter.Overnight status and alerts
A device that the power schedule has switched off shows as Switched off, not offline, from power-off until the morning warm-up is over. A device that stays reachable in standby keeps showing Online. It also doesn’t raise an offline alert while the room is powered down, or during the morning warm-up. If it’s still offline after the warm-up, it alerts as usual, within 30 minutes, and the run shows which device didn’t come back. Devices that weren’t switched off, including any whose power-off failed, alert overnight as normal. A run that fails raises one alert for the room, through the same channels as other alerts (email, Teams, ServiceNow). A failed readiness check raises Readiness check failed, naming the steps that failed and why; a failed power cycle raises Power cycle failed, with the reason. If the room fails again before the alert is resolved, the same alert is updated rather than a new one raised. The next run that passes resolves it, and closes any ServiceNow incident with it.Readiness checks
Set the default check
Select Save changes when you’re done.
If a room’s power cycle is still running at its check time, for example still warming up, the check waits for it to finish, for up to 30 minutes, so a room is never tested while it’s still starting up. The run records how long it waited.
Checks by room tag
If you use room tags, you can give a tag its own check, so every room with that tag gets it without setting rooms up one by one. For example, give Courtroom the “Court AM check” at 07:30 on weekdays, and every courtroom runs it, including rooms tagged later. The By room tag card lists every tag. Select Set a check on a tag and tick Customise on the Routine, Run at time or Days it should set. Anything you leave unticked comes from the default. Select Remove to take a tag’s check away; its rooms go back to the default, or to another of their tags. Each part of a room’s check comes from the first of these that sets it:- the room’s own settings (Customise on the room);
- its tag’s check;
- the default.
Customise a room
The rooms table shows each room’s routine, time and days. Select Customise to give a room its own Routine, Run at time or Days, such as a different routine for a video-conferencing room, or a later time for a room that powers on later. Once a room is customised, its button reads Edit. A room’s own routine is shown in darker text than the default. Select Reset to return it to its tag’s check, or the default. A room whose check time falls while its power schedule has it switched off shows Room switched off then. Move the check after the power-on time, or it will fail.Run now
Select Run now on a room to run its check straight away. Use it to check a room after a fix, or to try out a routine. You’re taken to the run to watch each step’s result arrive.Settings
Settings shared by both:Check the results
Select View runs, on any of the three tabs, for the run history: one row per room for each power cycle and each readiness check, with its type, when it was scheduled, its status, and how long it took. A power run’s duration is how long the room took to be ready after power-on; a readiness run’s is how long its routine took. Filter by date, room, type and status. To see one room’s results, open the room from Places in the sidebar, or filter Devices to it. A Room Readiness card above its devices shows the latest readiness check and overnight power cycle, which steps failed and why if the latest check failed, and a mark for each check over the last 14 days. Select any of them for that run, or All runs for this room for its full history. You need View Room Readiness to see the card. Select a run for its details: how far it got, and every step, with what it checked, on which device, what it expected, what it found and any error. For a power run, the steps are which devices switched off and back on. Each step’s result is summarised in a line per device: what it looked for (such asJudge_Level > -4), and what it found (such as online or Succeeded). Select Raw under a result for everything the step recorded, including each device’s raw reply.
For Expect status and Check metric steps, each result says where its reading came from. Fresh poll means the device was polled for that step, which is the usual case. Last report, 42 s old means the step used the device’s last regular report instead: ATEN PDUs always do, and so does any device whose fresh poll didn’t come back within 60 seconds. No reading means no reading was available at all. A last report more than two minutes old is highlighted, because it may predate what the step was checking, such as a power-on or a reboot.
To keep or share a run’s results, select Download PDF on the run. The report shows the room and its place, whether it passed, when it ran and how long it took, why it failed, and every step’s result. It’s available once the run has finished.
Export
Select Export CSV on the run history to download the runs in your current filter, with one row per step and the run’s details, including its type, repeated on each row, ready to pivot in a spreadsheet. Runs with no steps still get a row.The morning digest
Each morning, 30 minutes after the later of the power-on time and the readiness check time, a summary is emailed to every enabled email channel in Notifications, and copied to the helpdesk address if you set one. It has a section for the power schedule and one for readiness checks.Through the API
Integrations can read the same results through the Public API: each room’s readiness check and its latest power and readiness runs, every run with its type, and every step. Create a token with the Read Room Readiness scope; see API tokens and the API reference.Updated 06 Nov 2026 14:07 · page 78bd227