> ## Documentation Index
> Fetch the complete documentation index at: https://docs.marcus.involvecloud.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Aurora VPX Series

> AV-over-IP encoders and decoders. JSON over Telnet on port 6970; encoder vs decoder mode is auto-detected at connect.

**Works with:** Aurora Multimedia VPX-series AV-over-IP encoders and decoders.

| | |
| - | - |
| **Type** | Vendor adapter |
| **Vendor** | Aurora Multimedia |
| **Device types** | AV-over-IP |
| **Connection** | JSON over Telnet (TCP 6970) |
| **Power on/off from the portal** | No |
| **Protocol in the portal** | Aurora VPX Series (`aurora_vpx`) |

## Before you start

1. Check the Collector can reach the unit on TCP 6970. Encoder or decoder mode is detected automatically.

## Add the device

1. In the portal, go to **Devices** and select **New device**.
2. Choose the **Collector** that can reach the device, and set **Protocol** to **Aurora VPX Series**.
3. Enter the settings below and save. The Collector picks up the new device within seconds.

| Setting | Required | What to enter | Example |
| - | - | - | - |
| **Address** | Yes | Encoder or decoder IP (port 6970 is implied). | `192.168.10.20` |
| **Poll rate (seconds)** | No | How often to poll. Defaults to 60s. | `30` |

## Readings

These values appear under **Device Information** on the device page, and can be checked in Room Readiness routines.

| Reading | Shown as |
| - | - |
| `state` | State |
| `mode` | Mode |
| `fw_version` | Fw Version |
| `mac` | Mac |
| `hostname` | Hostname |
| `ip_address` | Ip Address |
| `ip_mode` | Ip Mode |
| `display_mode` | Display Mode |
| `hdmi_hdcp` | Hdmi Hdcp |
| `hdmi_hpd_in1` | Hdmi Hpd In1 |
| `hdmi_hpd_in2` | Hdmi Hpd In2 |
| `local_display_source` | Local Display Source |
| `stream_source` | Stream Source |
| `stream_status` | Stream Status |
| `video_h_size` | Video H Size |
| `video_v_size` | Video V Size |
| `video_fps` | Video Fps |

## Commands

Each command is a button on the device page, and can be used in Room Readiness routines.

| Command | Button | Notes |
| - | - | - |
| `reboot` | Reboot | |
| `identify` | Identify | |
| `stop_identify` | Stop Identify | |
| `mute` | Mute | |
| `unmute` | Unmute | |
| `join` | Join | |
| `leave` | Leave | |
| `start_stream` | Start Stream | |
| `stop_stream` | Stop Stream | |

Updated 26 Oct 2026 15:44 · page 2fa8d9c


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.